Mirror/markqvist___RNode_Firmware
1
0
Fork 0
mirror of https://github.com/markqvist/RNode_Firmware.git synced 2026-04-27 22:35:36 +00:00
Code Issues Projects Releases Packages Wiki Activity
markqvist___RNode_Firmware/Makefile
GlassOnTin 2c0c9f3d5a Add LVGL watch GUI with tileview navigation and serial screenshot 
LVGL 9.5.0 integration replacing direct framebuffer rendering.
Watch face with time, date, status bar (mode/battery), and three
complications (LoRa/GPS/Steps). Tileview swipe navigation between
five screens: watch face, radio status, GPS, messages, settings.
Haptic feedback on screen transitions via DRV2605.

Radio status screen shows frequency, LoRa params, RSSI bar gauge,
channel utilization, BLE state, and packet counts. GPS screen shows
coordinates, fix quality, altitude/speed, and beacon status.

Serial screenshot tool (scripts/screenshot.py) captures display
contents over USB CDC by sending trigger bytes and receiving the
shadow framebuffer as raw RGB565.

Build changes:
- FlashSize=16M in FQBN (bootloader embeds flash size, defaults 4MB)
- PSRAM=enabled for LVGL draw buffers and screenshot shadow buffer
- Custom 8MB app partition (partition_twatch.csv) for 16MB flash
- flash-twatch_ultra-full make target for full bootloader+partition+app flash

Architecture notes in code:
- display_init() must run BEFORE xl9555_init() (display power gate
  defaults high at power-on, reordering causes black screen)
- LVGL draw buffers use separate swap buffer for RGB565 byte-order
  conversion to avoid corrupting LVGL's internal buffer state
- Touch input registered via function pointer to decouple Gui.h from
  touch library include order
2026-03-28 11:41:45 +00:00

571 lines
No EOL
44 KiB
Makefile
Raw Blame History

# Copyright (C) 2024, Mark Qvist
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <https://www.gnu.org/licenses/>.
# Version 2.0.17 of the Arduino ESP core is based on ESP-IDF v4.4.7
ARDUINO_ESP_CORE_VER = 2.0.17
# Version 3.2.0 of the Arduino ESP core is based on ESP-IDF v5.4.1
# ARDUINO_ESP_CORE_VER = 3.2.0
PORT ?= /dev/ttyACM4
all: release
clean:
-rm -r ./build
-rm ./Release/rnode_firmware*
# Stop any process holding the serial port (e.g. rnsd)
free-port:
@if fuser $(PORT) >/dev/null 2>&1; then \
echo "Stopping process on $(PORT)..."; \
kill $$(fuser $(PORT) 2>/dev/null | tr -d ' :') 2>/dev/null; \
sleep 2; \
fi
test-kiss: free-port
@python3 test_kiss.py $(PORT)
prep: prep-avr prep-esp32 prep-samd
prep-avr:
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install arduino:avr --config-file arduino-cli.yaml
arduino-cli core install unsignedio:avr --config-file arduino-cli.yaml
prep-esp32:
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install esp32:esp32@$(ARDUINO_ESP_CORE_VER) --config-file arduino-cli.yaml
arduino-cli lib install "Adafruit SSD1306"
arduino-cli lib install "Adafruit SH110X"
arduino-cli lib install "Adafruit ST7735 and ST7789 Library"
arduino-cli lib install "Adafruit NeoPixel"
arduino-cli lib install "XPowersLib"
arduino-cli lib install "Crypto"
arduino-cli lib install "TinyGPSPlus"
arduino-cli lib install "lvgl@9.5.0"
prep-samd:
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install adafruit:samd --config-file arduino-cli.yaml
prep-nrf:
arduino-cli core update-index --config-file arduino-cli.yaml
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
arduino-cli core install Heltec_nRF52:Heltec_nRF52 --config-file arduino-cli.yaml
arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml
arduino-cli lib install "GxEPD2"
arduino-cli config set library.enable_unsafe_install true
arduino-cli lib install --git-url https://github.com/liamcottle/esp8266-oled-ssd1306#e16cee124fe26490cb14880c679321ad8ac89c95
pip install adafruit-nrfutil --upgrade
console-site:
make -C Console clean site
spiffs: console-site spiffs-image
spiffs-image:
python Release/esptool/spiffsgen.py 1966080 ./Console/build Release/console_image.bin
upload-spiffs:
@echo Deploying SPIFFS image...
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
check_bt_buffers:
@./esp32_btbufs.py ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/libraries/BluetoothSerial/src/BluetoothSerial.cpp
firmware:
arduino-cli compile --log --fqbn unsignedio:avr:rnode
firmware-mega2560:
arduino-cli compile --log --fqbn arduino:avr:mega
firmware-tbeam: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
firmware-tbeam_sx126x: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
firmware-t3s3:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x03\""
firmware-t3s3_sx127x:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""
firmware-t3s3_sx1280_pa:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x04\""
firmware-tdeck:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
firmware-tbeam_supreme:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=-DBOARD_MODEL=0x3D"
deploy-tbeam_supreme: firmware-tbeam_supreme free-port
./flash_parts.sh $(PORT)
@sleep 3
rnodeconf $(PORT) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
# T-Watch Ultra: 16MB flash, 8MB app partition, LVGL GUI
# FlashSize=16M is critical — the bootloader embeds flash size and defaults to 4MB.
# Without it, flash mapping fails silently beyond 0x400000 (black screen, no crash).
# partition_twatch.csv must be copied to the Arduino ESP32 tools/partitions/ directory.
# When changing partition scheme, flash ALL THREE binaries (bootloader + partition + app).
firmware-twatch_ultra:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc,FlashSize=16M,PSRAM=enabled" -e --build-property "build.partitions=partition_twatch" --build-property "upload.maximum_size=8388608" --build-property "compiler.cpp.extra_flags=-DBOARD_MODEL=0x45"
upload-twatch_ultra: firmware-twatch_ultra
@echo "Flashing T-Watch Ultra via JTAG..."
$(HOME)/.arduino15/packages/esp32/tools/openocd-esp32/v0.12.0-esp32-20230921/bin/openocd \
-s $(HOME)/.arduino15/packages/esp32/tools/openocd-esp32/v0.12.0-esp32-20230921/share/openocd/scripts \
-f board/esp32s3-builtin.cfg \
-c "program_esp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin 0x10000 verify reset exit"
@sleep 5
rnodeconf /dev/ttyACM4 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
# Full flash including bootloader and partition table (needed after partition changes)
flash-twatch_ultra-full: firmware-twatch_ultra
esptool.py --chip esp32s3 --port /dev/ttyACM4 --baud 921600 write_flash \
0x0000 build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin \
0x8000 build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin \
0x10000 build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin
firmware-lora32_v10: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
firmware-lora32_v10_extled: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
firmware-lora32_v20: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
firmware-lora32_v21: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
firmware-lora32_v21_extled: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
firmware-lora32_v21_tcxo: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
firmware-heltec32_v2: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
firmware-heltec32_v2_extled: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
firmware-heltec32_v3:
arduino-cli compile --log --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
firmware-heltec32_v4:
arduino-cli compile --log --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3F\""
firmware-rnode_ng_20: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
firmware-rnode_ng_21: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
firmware-featheresp32: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
firmware-genericesp32: check_bt_buffers
arduino-cli compile --log --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
firmware-rak4631:
arduino-cli compile --log --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\""
firmware-heltec_t114:
arduino-cli compile --log --fqbn Heltec_nRF52:Heltec_nRF52:HT-n5262 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3C\""
firmware-techo:
arduino-cli compile --log --fqbn adafruit:nrf52:pca10056 -e --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
firmware-xiao_s3:
arduino-cli compile --log --fqbn "esp32:esp32:XIAO_ESP32S3" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3E\""
upload:
arduino-cli upload -p /dev/ttyUSB0 --fqbn unsignedio:avr:rnode
upload-mega2560:
arduino-cli upload -p /dev/ttyACM0 --fqbn arduino:avr:mega
upload-tbeam:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:t-beam
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-tbeam_sx1262:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:t-beam
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.t-beam/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v10:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v20:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-lora32_v21:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v2:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V2
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v3:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:heltec_wifi_lora_32_V3
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-heltec32_v4:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
deploy-heltec32_v4: firmware-heltec32_v4
python3 $(HOME)/.arduino15/packages/esp32/tools/esptool_py/4.5.1/esptool.py \
--chip esp32s3 --port /dev/ttyACM0 --baud 115200 --no-stub \
--before default_reset --after hard_reset write_flash -z \
--flash_mode dio --flash_freq 80m --flash_size 8MB \
0x10000 build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin
@sleep 3
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
upload-tdeck:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-tbeam_supreme: free-port
arduino-cli upload -p $(PORT) --fqbn esp32:esp32:esp32s3
@sleep 3
rnodeconf $(PORT) --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32-s3 --port $(PORT) --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rnode_ng_20:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rnode_ng_21:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:ttgo-lora32
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-t3s3:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:esp32s3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-featheresp32:
arduino-cli upload -p /dev/ttyUSB0 --fqbn esp32:esp32:featheresp32
@sleep 1
rnodeconf /dev/ttyUSB0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.featheresp32/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32 --port /dev/ttyUSB0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
upload-rak4631:
arduino-cli upload -p /dev/ttyACM0 --fqbn rakwireless:nrf52:WisCoreRAK4631Board
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes from_device /dev/ttyACM0)
upload-heltec_t114:
arduino-cli upload -p /dev/ttyACM0 --fqbn Heltec_nRF52:Heltec_nRF52:HT-n5262
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes from_device /dev/ttyACM0)
upload-techo:
arduino-cli upload -p /dev/ttyACM0 --fqbn adafruit:nrf52:pca10056
@sleep 6
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes from_device /dev/ttyACM0)
upload-xiao_s3:
arduino-cli upload -p /dev/ttyACM0 --fqbn esp32:esp32:XIAO_ESP32S3
@sleep 1
rnodeconf /dev/ttyACM0 --firmware-hash $$(./partition_hashes ./build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.bin)
@sleep 3
python ./Release/esptool/esptool.py --chip esp32s3 --port /dev/ttyACM0 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size 4MB 0x210000 ./Release/console_image.bin
release: release-all
release-all: console-site spiffs-image release-tbeam release-tbeam_sx1262 release-lora32_v10 release-lora32_v20 release-lora32_v21 release-lora32_v10_extled release-lora32_v20_extled release-lora32_v21_extled release-lora32_v21_tcxo release-featheresp32 release-genericesp32 release-heltec32_v2 release-heltec32_v3 release-heltec32_v4 release-heltec32_v2_extled release-heltec_t114 release-techo release-rnode_ng_20 release-rnode_ng_21 release-t3s3 release-t3s3_sx127x release-t3s3_sx1280_pa release-tdeck release-tbeam_supreme release-rak4631 release-xiao_s3 release-hashes
release-hashes:
python ./release_hashes.py > ./Release/release.json
release-rnode:
arduino-cli compile --fqbn unsignedio:avr:rnode -e
cp build/unsignedio.avr.rnode/RNode_Firmware.ino.hex Release/rnode_firmware.hex
rm -r build
release-tbeam: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam.boot_app0
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin build/rnode_firmware_tbeam.bin
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam.bootloader
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam.partitions
zip --junk-paths ./Release/rnode_firmware_tbeam.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam.boot_app0 build/rnode_firmware_tbeam.bin build/rnode_firmware_tbeam.bootloader build/rnode_firmware_tbeam.partitions
rm -r build
release-tbeam_sx1262: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:t-beam -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x33\" \"-DMODEM=0x03\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_sx1262.boot_app0
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_sx1262.bin
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_sx1262.bootloader
cp build/esp32.esp32.t-beam/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_sx1262.partitions
zip --junk-paths ./Release/rnode_firmware_tbeam_sx1262.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_sx1262.boot_app0 build/rnode_firmware_tbeam_sx1262.bin build/rnode_firmware_tbeam_sx1262.bootloader build/rnode_firmware_tbeam_sx1262.partitions
rm -r build
release-lora32_v10: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v10.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v10.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
rm -r build
release-lora32_v20: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v20.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v20.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
rm -r build
release-lora32_v21: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v21.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
rm -r build
release-lora32_v10_extled: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x39\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v10.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v10.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v10.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v10.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v10.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v10.boot_app0 build/rnode_firmware_lora32v10.bin build/rnode_firmware_lora32v10.bootloader build/rnode_firmware_lora32v10.partitions
rm -r build
release-lora32_v20_extled: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x36\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v20.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v20.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v20.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v20.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v20_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v20.boot_app0 build/rnode_firmware_lora32v20.bin build/rnode_firmware_lora32v20.bootloader build/rnode_firmware_lora32v20.partitions
rm -r build
release-lora32_v21_extled: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v21.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v21_extled.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21.boot_app0 build/rnode_firmware_lora32v21.bin build/rnode_firmware_lora32v21.bootloader build/rnode_firmware_lora32v21.partitions
rm -r build
release-lora32_v21_tcxo: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x37\" \"-DENABLE_TCXO=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_lora32v21_tcxo.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_lora32v21_tcxo.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_lora32v21_tcxo.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_lora32v21_tcxo.partitions
zip --junk-paths ./Release/rnode_firmware_lora32v21_tcxo.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_lora32v21_tcxo.boot_app0 build/rnode_firmware_lora32v21_tcxo.bin build/rnode_firmware_lora32v21_tcxo.bootloader build/rnode_firmware_lora32v21_tcxo.partitions
rm -r build
release-heltec32_v2: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
rm -r build
release-heltec32_v3: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V3 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3A\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v3.boot_app0
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v3.bin
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v3.bootloader
cp build/esp32.esp32.heltec_wifi_lora_32_V3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v3.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v3.boot_app0 build/rnode_firmware_heltec32v3.bin build/rnode_firmware_heltec32v3.bootloader build/rnode_firmware_heltec32v3.partitions
rm -r build
release-heltec32_v4: check_bt_buffers
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3F\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v4pa.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v4pa.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v4pa.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v4pa.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v4pa.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v4pa.boot_app0 build/rnode_firmware_heltec32v4pa.bin build/rnode_firmware_heltec32v4pa.bootloader build/rnode_firmware_heltec32v4pa.partitions
rm -r build
release-heltec32_v2_extled: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:heltec_wifi_lora_32_V2 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x38\" \"-DEXTERNAL_LEDS=true\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_heltec32v2.boot_app0
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bin build/rnode_firmware_heltec32v2.bin
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_heltec32v2.bootloader
cp build/esp32.esp32.heltec_wifi_lora_32_V2/RNode_Firmware.ino.partitions.bin build/rnode_firmware_heltec32v2.partitions
zip --junk-paths ./Release/rnode_firmware_heltec32v2.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_heltec32v2.boot_app0 build/rnode_firmware_heltec32v2.bin build/rnode_firmware_heltec32v2.bootloader build/rnode_firmware_heltec32v2.partitions
rm -r build
release-rnode_ng_20: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x40\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng20.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng20.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng20.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng20.partitions
zip --junk-paths ./Release/rnode_firmware_ng20.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng20.boot_app0 build/rnode_firmware_ng20.bin build/rnode_firmware_ng20.bootloader build/rnode_firmware_ng20.partitions
rm -r build
release-rnode_ng_21: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:ttgo-lora32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x41\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_ng21.boot_app0
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bin build/rnode_firmware_ng21.bin
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_ng21.bootloader
cp build/esp32.esp32.ttgo-lora32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_ng21.partitions
zip --junk-paths ./Release/rnode_firmware_ng21.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_ng21.boot_app0 build/rnode_firmware_ng21.bin build/rnode_firmware_ng21.bootloader build/rnode_firmware_ng21.partitions
rm -r build
release-t3s3:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x03\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3.partitions
zip --junk-paths ./Release/rnode_firmware_t3s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3.boot_app0 build/rnode_firmware_t3s3.bin build/rnode_firmware_t3s3.bootloader build/rnode_firmware_t3s3.partitions
rm -r build
release-t3s3_sx1280_pa:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x04\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3_sx1280_pa.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3_sx1280_pa.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3_sx1280_pa.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3_sx1280_pa.partitions
zip --junk-paths ./Release/rnode_firmware_t3s3_sx1280_pa.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3_sx1280_pa.boot_app0 build/rnode_firmware_t3s3_sx1280_pa.bin build/rnode_firmware_t3s3_sx1280_pa.bootloader build/rnode_firmware_t3s3_sx1280_pa.partitions
rm -r build
release-t3s3_sx127x:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x42\" \"-DMODEM=0x01\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_t3s3_sx127x.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_t3s3_sx127x.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_t3s3_sx127x.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_t3s3_sx127x.partitions
zip --junk-paths ./Release/rnode_firmware_t3s3_sx127x.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_t3s3_sx127x.boot_app0 build/rnode_firmware_t3s3_sx127x.bin build/rnode_firmware_t3s3_sx127x.bootloader build/rnode_firmware_t3s3_sx127x.partitions
rm -r build
release-tdeck:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3B\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tdeck.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tdeck.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tdeck.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tdeck.partitions
zip --junk-paths ./Release/rnode_firmware_tdeck.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tdeck.boot_app0 build/rnode_firmware_tdeck.bin build/rnode_firmware_tdeck.bootloader build/rnode_firmware_tdeck.partitions
rm -r build
release-tbeam_supreme:
arduino-cli compile --fqbn "esp32:esp32:esp32s3:CDCOnBoot=cdc" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3D\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_tbeam_supreme.boot_app0
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bin build/rnode_firmware_tbeam_supreme.bin
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_tbeam_supreme.bootloader
cp build/esp32.esp32.esp32s3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_tbeam_supreme.partitions
zip --junk-paths ./Release/rnode_firmware_tbeam_supreme.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_tbeam_supreme.boot_app0 build/rnode_firmware_tbeam_supreme.bin build/rnode_firmware_tbeam_supreme.bootloader build/rnode_firmware_tbeam_supreme.partitions
rm -r build
release-featheresp32: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:featheresp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x34\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_featheresp32.boot_app0
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.bin build/rnode_firmware_featheresp32.bin
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_featheresp32.bootloader
cp build/esp32.esp32.featheresp32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_featheresp32.partitions
zip --junk-paths ./Release/rnode_firmware_featheresp32.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_featheresp32.boot_app0 build/rnode_firmware_featheresp32.bin build/rnode_firmware_featheresp32.bootloader build/rnode_firmware_featheresp32.partitions
rm -r build
release-genericesp32: check_bt_buffers
arduino-cli compile --fqbn esp32:esp32:esp32 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x35\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_esp32_generic.boot_app0
cp build/esp32.esp32.esp32/RNode_Firmware.ino.bin build/rnode_firmware_esp32_generic.bin
cp build/esp32.esp32.esp32/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_esp32_generic.bootloader
cp build/esp32.esp32.esp32/RNode_Firmware.ino.partitions.bin build/rnode_firmware_esp32_generic.partitions
zip --junk-paths ./Release/rnode_firmware_esp32_generic.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_esp32_generic.boot_app0 build/rnode_firmware_esp32_generic.bin build/rnode_firmware_esp32_generic.bootloader build/rnode_firmware_esp32_generic.partitions
rm -r build
release-mega2560:
arduino-cli compile --fqbn arduino:avr:mega -e --build-property "compiler.cpp.extra_flags=\"-DMODEM=0x01\""
cp build/arduino.avr.mega/RNode_Firmware.ino.hex Release/rnode_firmware_m2560.hex
rm -r build
release-rak4631:
arduino-cli compile --fqbn rakwireless:nrf52:WisCoreRAK4631Board -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x51\""
cp build/rakwireless.nrf52.WisCoreRAK4631Board/RNode_Firmware.ino.hex build/rnode_firmware_rak4631.hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_rak4631.hex Release/rnode_firmware_rak4631.zip
release-heltec_t114:
arduino-cli compile --fqbn Heltec_nRF52:Heltec_nRF52:HT-n5262 -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3C\""
cp build/Heltec_nRF52.Heltec_nRF52.HT-n5262/RNode_Firmware.ino.hex build/rnode_firmware_heltec_t114.hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_heltec_t114.hex Release/rnode_firmware_heltec_t114.zip
release-techo:
arduino-cli compile --log --fqbn adafruit:nrf52:pca10056 -e --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
cp build/adafruit.nrf52.pca10056/RNode_Firmware.ino.hex build/rnode_firmware_techo.hex
adafruit-nrfutil dfu genpkg --dev-type 0x0052 --application build/rnode_firmware_techo.hex Release/rnode_firmware_techo.zip
release-xiao_s3:
arduino-cli compile --fqbn "esp32:esp32:XIAO_ESP32S3" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3E\""
cp ~/.arduino15/packages/esp32/hardware/esp32/$(ARDUINO_ESP_CORE_VER)/tools/partitions/boot_app0.bin build/rnode_firmware_xiao_esp32s3.boot_app0
cp build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.bin build/rnode_firmware_xiao_esp32s3.bin
cp build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_xiao_esp32s3.bootloader
cp build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_xiao_esp32s3.partitions
zip --junk-paths ./Release/rnode_firmware_xiao_esp32s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_xiao_esp32s3.boot_app0 build/rnode_firmware_xiao_esp32s3.bin build/rnode_firmware_xiao_esp32s3.bootloader build/rnode_firmware_xiao_esp32s3.partitions
rm -r build
Reference in a new issue View git blame Copy permalink