mirror of
https://github.com/markqvist/RNode_Firmware.git
synced 2026-04-27 14:30:33 +00:00
Add Wio Tracker L1 support
This commit is contained in:
James L
parent
180207aa2e
commit
ffdb4fd14c
12 changed files with 476 additions and 12 deletions
44
Boards.h
44
Boards.h
|
|
@ -108,6 +108,11 @@
|
|||
#define BOARD_TECHO 0x44
|
||||
#define MODEL_16 0x16 // T-Echo 433 MHz
|
||||
#define MODEL_17 0x17 // T-Echo 868/915 MHz
|
||||
|
||||
#define PRODUCT_WIO_L1 0x18 // Seeed Wio Tracker L1 devices
|
||||
#define BOARD_WIO_L1 0x45
|
||||
#define MODEL_18 0x18 // Wio Tracker L1, 433 MHz
|
||||
#define MODEL_19 0x19 // Wio Tracker L1, 868/915 MHz
|
||||
|
||||
#define PRODUCT_RAK4631 0x10
|
||||
#define BOARD_RAK4631 0x51
|
||||
|
|
@ -809,6 +814,45 @@
|
|||
const int pin_led_rx = PIN_LED_BLUE;
|
||||
const int pin_led_tx = PIN_LED_RED;
|
||||
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
#define MODEM SX1262
|
||||
#define HAS_EEPROM false
|
||||
#define HAS_DISPLAY true
|
||||
#define HAS_BLUETOOTH false
|
||||
#define HAS_BLE true
|
||||
#define HAS_CONSOLE false
|
||||
#define HAS_PMU false
|
||||
#define HAS_NP false
|
||||
#define HAS_SD false
|
||||
#define HAS_TCXO true
|
||||
#define HAS_RF_SWITCH_RX_TX true
|
||||
#define HAS_BUSY true
|
||||
#define HAS_INPUT true
|
||||
#define DIO2_AS_RF_SWITCH true
|
||||
#define CONFIG_UART_BUFFER_SIZE 6144
|
||||
#define CONFIG_QUEUE_SIZE 6144
|
||||
#define CONFIG_QUEUE_MAX_LENGTH 200
|
||||
#define EEPROM_SIZE 296
|
||||
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
|
||||
#define BLE_MANUFACTURER "Seeed Studio"
|
||||
#define BLE_MODEL "Wio Tracker L1"
|
||||
|
||||
const int pin_btn_usr1 = 13; // Menu key (P0.08)
|
||||
|
||||
// SX1262 (Wio-SX1262 module)
|
||||
const int pin_rxen = 5; // Lora_sw (P1.08)
|
||||
const int pin_txen = -1;
|
||||
const int pin_reset = 2; // Lora_rst (P1.07)
|
||||
const int pin_cs = 4; // Lora_cs (P1.14)
|
||||
const int pin_sclk = 8; // Lora_sck (P0.30)
|
||||
const int pin_mosi = 10; // Lora_mosi (P0.28)
|
||||
const int pin_miso = 9; // Lora_miso (P0.03)
|
||||
const int pin_busy = 3; // Lora_busy (P1.10)
|
||||
const int pin_dio = 1; // Lora_dio1 (P0.07)
|
||||
const int pin_led_rx = 11; // Mesh LED (P1.01)
|
||||
const int pin_led_tx = 11;
|
||||
const int pin_tcxo_enable = -1;
|
||||
|
||||
#elif BOARD_MODEL == BOARD_HELTEC_T114
|
||||
#define MODEM SX1262
|
||||
#define HAS_EEPROM false
|
||||
|
|
|
|||
|
|
@ -8,10 +8,11 @@ The RNode Firmware supports the following boards:
|
|||
- LilyGO LoRa32 v2.0 devices
|
||||
- LilyGO LoRa32 v2.1 devices
|
||||
- Heltec LoRa32 v2 devices
|
||||
- Seeed Wio Tracker L1 devices (915 MHz)
|
||||
- Homebrew RNodes based on ATmega1284p boards
|
||||
- Homebrew RNodes based on ATmega2560 boards
|
||||
- Homebrew RNodes based on Adafruit Feather ESP32 boards
|
||||
- Homebrew RNodes based on generic ESP32 boards
|
||||
|
||||
## Supported Transceiver Modules
|
||||
The RNode Firmware supports all transceiver modules based on **Semtech SX1276** or **Semtech SX1278** chips, that have an **SPI interface** and expose the **DIO_0** interrupt pin from the chip.
|
||||
The RNode Firmware supports all transceiver modules based on **Semtech SX1276** or **Semtech SX1278** chips, that have an **SPI interface** and expose the **DIO_0** interrupt pin from the chip.
|
||||
|
|
|
|||
25
Display.h
25
Display.h
|
|
@ -22,7 +22,7 @@
|
|||
#elif BOARD_MODEL == BOARD_HELTEC_T114
|
||||
#include "ST7789.h"
|
||||
#define COLOR565(r, g, b) (((r & 0xF8) << 8) | ((g & 0xFC) << 3) | ((b & 0xF8) >> 3))
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1 || BOARD_MODEL == BOARD_WIO_L1
|
||||
#include <Adafruit_SH110X.h>
|
||||
#else
|
||||
#include <Wire.h>
|
||||
|
|
@ -71,6 +71,12 @@
|
|||
#define DISP_ADDR 0x3C
|
||||
#define SCL_OLED 14
|
||||
#define SDA_OLED 13
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
#define DISP_RST -1
|
||||
#define DISP_ADDR 0x3D
|
||||
#define SCL_OLED 15
|
||||
#define SDA_OLED 14
|
||||
#define DISP_CUSTOM_ADDR true
|
||||
#elif BOARD_MODEL == BOARD_RNODE_NG_21
|
||||
#define DISP_RST -1
|
||||
#define DISP_ADDR 0x3C
|
||||
|
|
@ -112,7 +118,7 @@
|
|||
ST7789Spi display(&SPI1, DISPLAY_RST, DISPLAY_DC, DISPLAY_CS);
|
||||
#define SSD1306_WHITE ST77XX_WHITE
|
||||
#define SSD1306_BLACK ST77XX_BLACK
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1 || BOARD_MODEL == BOARD_WIO_L1
|
||||
Adafruit_SH1106G display = Adafruit_SH1106G(128, 64, &Wire, -1);
|
||||
#define SSD1306_WHITE SH110X_WHITE
|
||||
#define SSD1306_BLACK SH110X_BLACK
|
||||
|
|
@ -225,7 +231,7 @@ void update_area_positions() {
|
|||
}
|
||||
|
||||
uint8_t display_contrast = 0x00;
|
||||
#if BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#if BOARD_MODEL == BOARD_TBEAM_S_V1 || BOARD_MODEL == BOARD_WIO_L1
|
||||
void set_contrast(Adafruit_SH1106G *display, uint8_t value) {
|
||||
}
|
||||
#elif BOARD_MODEL == BOARD_HELTEC_T114
|
||||
|
|
@ -323,6 +329,8 @@ bool display_init() {
|
|||
Wire.begin(SDA_OLED, SCL_OLED);
|
||||
#elif BOARD_MODEL == BOARD_XIAO_S3
|
||||
Wire.begin(SDA_OLED, SCL_OLED);
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
Wire.begin();
|
||||
#endif
|
||||
|
||||
#if HAS_EEPROM
|
||||
|
|
@ -376,7 +384,7 @@ bool display_init() {
|
|||
// set white as default pixel colour for Heltec T114
|
||||
display.setRGB(COLOR565(0xFF, 0xFF, 0xFF));
|
||||
if (false) {
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1
|
||||
#elif BOARD_MODEL == BOARD_TBEAM_S_V1 || BOARD_MODEL == BOARD_WIO_L1
|
||||
if (!display.begin(display_address, true)) {
|
||||
#else
|
||||
if (!display.begin(SSD1306_SWITCHCAPVCC, display_address)) {
|
||||
|
|
@ -440,6 +448,15 @@ bool display_init() {
|
|||
#endif
|
||||
}
|
||||
|
||||
#if BOARD_MODEL == BOARD_WIO_L1
|
||||
// Force a clean OLED state on boot to clear any prior firmware remnants.
|
||||
display.clearDisplay();
|
||||
display.display();
|
||||
delay(25);
|
||||
display.clearDisplay();
|
||||
display.display();
|
||||
#endif
|
||||
|
||||
update_area_positions();
|
||||
|
||||
for (int i = 0; i < WATERFALL_SIZE; i++) { waterfall[i] = 0; }
|
||||
|
|
|
|||
9
Makefile
9
Makefile
|
|
@ -51,6 +51,10 @@ prep-nrf:
|
|||
arduino-cli core install rakwireless:nrf52 --config-file arduino-cli.yaml
|
||||
arduino-cli core install Heltec_nRF52:Heltec_nRF52 --config-file arduino-cli.yaml
|
||||
arduino-cli core install adafruit:nrf52 --config-file arduino-cli.yaml
|
||||
arduino-cli lib install "Adafruit GFX Library"
|
||||
arduino-cli lib install "Adafruit SSD1306"
|
||||
arduino-cli lib install "Adafruit SH110X"
|
||||
arduino-cli lib install "Crypto"
|
||||
arduino-cli lib install "GxEPD2"
|
||||
arduino-cli config set library.enable_unsafe_install true
|
||||
arduino-cli lib install --git-url https://github.com/liamcottle/esp8266-oled-ssd1306#e16cee124fe26490cb14880c679321ad8ac89c95
|
||||
|
|
@ -149,6 +153,9 @@ firmware-heltec_t114:
|
|||
firmware-techo:
|
||||
arduino-cli compile --log --fqbn adafruit:nrf52:pca10056 -e --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x44\""
|
||||
|
||||
firmware-wio_l1:
|
||||
arduino-cli compile --log --fqbn Seeeduino:nrf52:seeed_wio_tracker_L1 -e --build-cache-path /tmp/arduino-cache-$${USER} --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x45\""
|
||||
|
||||
firmware-xiao_s3:
|
||||
arduino-cli compile --log --fqbn "esp32:esp32:XIAO_ESP32S3" -e --build-property "build.partitions=no_ota" --build-property "upload.maximum_size=2097152" --build-property "compiler.cpp.extra_flags=\"-DBOARD_MODEL=0x3E\""
|
||||
|
||||
|
|
@ -515,4 +522,4 @@ release-xiao_s3:
|
|||
cp build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.bootloader.bin build/rnode_firmware_xiao_esp32s3.bootloader
|
||||
cp build/esp32.esp32.XIAO_ESP32S3/RNode_Firmware.ino.partitions.bin build/rnode_firmware_xiao_esp32s3.partitions
|
||||
zip --junk-paths ./Release/rnode_firmware_xiao_esp32s3.zip ./Release/esptool/esptool.py ./Release/console_image.bin build/rnode_firmware_xiao_esp32s3.boot_app0 build/rnode_firmware_xiao_esp32s3.bin build/rnode_firmware_xiao_esp32s3.bootloader build/rnode_firmware_xiao_esp32s3.partitions
|
||||
rm -r build
|
||||
rm -r build
|
||||
|
|
|
|||
26
Power.h
26
Power.h
|
|
@ -180,6 +180,23 @@ float pmu_temperature = PMU_TEMP_MIN-1;
|
|||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
float bat_state_change_v = 0;
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
#define BAT_V_MIN 3.15
|
||||
#define BAT_V_MAX 4.2
|
||||
#define BAT_V_CHG 4.48
|
||||
#define BAT_V_FLOAT 4.33
|
||||
#define BAT_SAMPLES 7
|
||||
const uint8_t pin_vbat = 16; // D16, P0.31
|
||||
const uint8_t pin_ctrl = 30; // D30, P0.04 (BAT_adc_CTR)
|
||||
float bat_p_samples[BAT_SAMPLES];
|
||||
float bat_v_samples[BAT_SAMPLES];
|
||||
uint8_t bat_samples_count = 0;
|
||||
int bat_discharging_samples = 0;
|
||||
int bat_charging_samples = 0;
|
||||
int bat_charged_samples = 0;
|
||||
bool bat_voltage_dropping = false;
|
||||
float bat_delay_v = 0;
|
||||
float bat_state_change_v = 0;
|
||||
#endif
|
||||
|
||||
uint32_t last_pmu_update = 0;
|
||||
|
|
@ -202,7 +219,7 @@ void measure_temperature() {
|
|||
}
|
||||
|
||||
void measure_battery() {
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC_T114 || BOARD_MODEL == BOARD_TECHO
|
||||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_HELTEC_T114 || BOARD_MODEL == BOARD_TECHO || BOARD_MODEL == BOARD_WIO_L1
|
||||
battery_installed = true;
|
||||
#if BOARD_MODEL == BOARD_HELTEC32_V3 || BOARD_MODEL == BOARD_HELTEC32_V4
|
||||
battery_indeterminate = false;
|
||||
|
|
@ -220,6 +237,8 @@ void measure_battery() {
|
|||
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.017165;
|
||||
#elif BOARD_MODEL == BOARD_TECHO
|
||||
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.007067;
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
float battery_measurement = (float)(analogRead(pin_vbat)) * 0.00704;
|
||||
#else
|
||||
float battery_measurement = (float)(analogRead(pin_vbat)) / 4095.0*7.26;
|
||||
#endif
|
||||
|
|
@ -414,6 +433,11 @@ bool init_pmu() {
|
|||
#if BOARD_MODEL == BOARD_RNODE_NG_21 || BOARD_MODEL == BOARD_LORA32_V2_1 || BOARD_MODEL == BOARD_TDECK || BOARD_MODEL == BOARD_T3S3 || BOARD_MODEL == BOARD_TECHO
|
||||
pinMode(pin_vbat, INPUT);
|
||||
return true;
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
pinMode(pin_ctrl, OUTPUT);
|
||||
digitalWrite(pin_ctrl, HIGH);
|
||||
pinMode(pin_vbat, INPUT);
|
||||
return true;
|
||||
#elif BOARD_MODEL == BOARD_HELTEC32_V3
|
||||
// there are three version of V3: V3, V3.1, and V3.2
|
||||
// V3 and V3.1 have a pull up on pin_ctrl and are active low
|
||||
|
|
|
|||
|
|
@ -129,7 +129,7 @@ void setup() {
|
|||
boot_seq();
|
||||
#endif
|
||||
|
||||
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_HELTEC_T114 && BOARD_MODEL != BOARD_TECHO && BOARD_MODEL != BOARD_T3S3 && BOARD_MODEL != BOARD_TBEAM_S_V1 && BOARD_MODEL != BOARD_HELTEC32_V4
|
||||
#if BOARD_MODEL != BOARD_RAK4631 && BOARD_MODEL != BOARD_HELTEC_T114 && BOARD_MODEL != BOARD_TECHO && BOARD_MODEL != BOARD_T3S3 && BOARD_MODEL != BOARD_TBEAM_S_V1 && BOARD_MODEL != BOARD_HELTEC32_V4 && BOARD_MODEL != BOARD_WIO_L1
|
||||
// Some boards need to wait until the hardware UART is set up before booting
|
||||
// the full firmware. In the case of the RAK4631 and Heltec T114, the line below will wait
|
||||
// until a serial connection is actually established with a master. Thus, it
|
||||
|
|
|
|||
16
Utilities.h
16
Utilities.h
|
|
@ -371,6 +371,13 @@ uint8_t boot_vector = 0x00;
|
|||
void led_tx_off() { digitalWrite(pin_led_tx, LED_OFF); }
|
||||
void led_id_on() { }
|
||||
void led_id_off() { }
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
void led_rx_on() { digitalWrite(pin_led_rx, HIGH); }
|
||||
void led_rx_off() { digitalWrite(pin_led_rx, LOW); }
|
||||
void led_tx_on() { digitalWrite(pin_led_tx, HIGH); }
|
||||
void led_tx_off() { digitalWrite(pin_led_tx, LOW); }
|
||||
void led_id_on() { }
|
||||
void led_id_off() { }
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -1381,6 +1388,9 @@ void setTXPower() {
|
|||
if (model == MODEL_E3) LoRa->setTxPower(mapped_lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_E8) LoRa->setTxPower(mapped_lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_18) LoRa->setTxPower(mapped_lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_19) LoRa->setTxPower(mapped_lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
|
||||
if (model == MODEL_FE) LoRa->setTxPower(mapped_lora_txp, PA_OUTPUT_PA_BOOST_PIN);
|
||||
if (model == MODEL_FF) LoRa->setTxPower(mapped_lora_txp, PA_OUTPUT_RFO_PIN);
|
||||
}
|
||||
|
|
@ -1597,7 +1607,7 @@ bool eeprom_product_valid() {
|
|||
#elif PLATFORM == PLATFORM_ESP32
|
||||
if (rval == PRODUCT_RNODE || rval == BOARD_RNODE_NG_20 || rval == BOARD_RNODE_NG_21 || rval == PRODUCT_HMBRW || rval == PRODUCT_TBEAM || rval == PRODUCT_T32_10 || rval == PRODUCT_T32_20 || rval == PRODUCT_T32_21 || rval == PRODUCT_H32_V2 || rval == PRODUCT_H32_V3 || rval == PRODUCT_H32_V4 || rval == PRODUCT_TDECK_V1 || rval == PRODUCT_TBEAM_S_V1 || rval == PRODUCT_XIAO_S3) {
|
||||
#elif PLATFORM == PLATFORM_NRF52
|
||||
if (rval == PRODUCT_RAK4631 || rval == PRODUCT_HELTEC_T114 || rval == PRODUCT_TECHO || rval == PRODUCT_HMBRW) {
|
||||
if (rval == PRODUCT_RAK4631 || rval == PRODUCT_HELTEC_T114 || rval == PRODUCT_TECHO || rval == PRODUCT_WIO_L1 || rval == PRODUCT_HMBRW) {
|
||||
#else
|
||||
if (false) {
|
||||
#endif
|
||||
|
|
@ -1649,6 +1659,8 @@ bool eeprom_model_valid() {
|
|||
if (model == MODEL_C6 || model == MODEL_C7) {
|
||||
#elif BOARD_MODEL == BOARD_RAK4631
|
||||
if (model == MODEL_11 || model == MODEL_12) {
|
||||
#elif BOARD_MODEL == BOARD_WIO_L1
|
||||
if (model == MODEL_18 || model == MODEL_19) {
|
||||
#elif BOARD_MODEL == BOARD_HUZZAH32
|
||||
if (model == MODEL_FF) {
|
||||
#elif BOARD_MODEL == BOARD_GENERIC_ESP32
|
||||
|
|
@ -2019,4 +2031,4 @@ void host_disconnected() {
|
|||
last_rssi = -292;
|
||||
last_rssi_raw = 0x00;
|
||||
last_snr_raw = 0x80;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -4,4 +4,5 @@ board_manager:
|
|||
- https://raw.githubusercontent.com/RAKwireless/RAKwireless-Arduino-BSP-Index/main/package_rakwireless_index.json
|
||||
- https://github.com/HelTecAutomation/Heltec_nRF52/releases/download/1.7.0/package_heltec_nrf_index.json
|
||||
- https://adafruit.github.io/arduino-board-index/package_adafruit_index.json
|
||||
- https://files.seeedstudio.com/arduino/package_seeeduino_boards_index.json
|
||||
- http://unsigned.io/arduino/package_unsignedio_UnsignedBoards_index.json
|
||||
|
|
|
|||
96
boards/seeed_wio_tracker_L1/variant.cpp
Normal file
96
boards/seeed_wio_tracker_L1/variant.cpp
Normal file
|
|
@ -0,0 +1,96 @@
|
|||
/*
|
||||
* variant.cpp - Digital pin mapping for TRACKER L1
|
||||
*
|
||||
* This file defines the pin mapping array that maps logical digital pins (D0-D17)
|
||||
* to physical GPIO ports/pins on the Nordic nRF52 series microcontroller.
|
||||
*
|
||||
* Board: [Seeed Studio WIO TRACKER L1]
|
||||
* Hardware Features:
|
||||
* - LoRa module (CS/SCK/MISO/MOSI control pins)
|
||||
* - GNSS module (TX/RX/Reset/Wakeup)
|
||||
* - User LEDs (D11-D12)
|
||||
* - User button (D13)
|
||||
* - Grove/NFC interface (D14-D15)
|
||||
* - Battery voltage monitoring (D16)
|
||||
*
|
||||
* Created [20250521]
|
||||
* By [Dylan]
|
||||
*/
|
||||
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
/**
|
||||
* @brief Digital pin to GPIO port/pin mapping table
|
||||
*
|
||||
* Format: Logical Pin (Dx) -> nRF Port.Pin (Px.xx)
|
||||
*
|
||||
*/
|
||||
|
||||
extern "C" {
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// D0 .. D10 - Peripheral control pins
|
||||
41, // D0 P1.09 GNSS_WAKEUP
|
||||
7, // D1 P0.07 LORA_DIO1
|
||||
39, // D2 P1,07 LORA_RESET
|
||||
42, // D3 P1.10 LORA_BUSY
|
||||
46, // D4 P1.14 (A4/SDA) LORA_CS
|
||||
40, // D5 P1.08 (A5/SCL) LORA_SW
|
||||
27, // D6 P0.27 (UART_TX) GNSS_TX
|
||||
26, // D7 P0.26 (UART_RX) GNSS_RX
|
||||
30, // D8 P0.30 (SPI_SCK) LORA_SCK
|
||||
3, // D9 P0.3 (SPI_MISO) LORA_MISO
|
||||
28, // D10 P0.28 (SPI_MOSI) LORA_MOSI
|
||||
|
||||
// D11-D12 - LED outputs
|
||||
33, // D11 P1.1 User LED
|
||||
// Buzzzer
|
||||
32, // D12 P1.0 Buzzer
|
||||
|
||||
// D13 - User input
|
||||
8, // D13 P0.08 User Button
|
||||
|
||||
// D14-D15 - Grove interface
|
||||
6, // D14 P0.06 OLED SDA
|
||||
5, // D15 P0.05 OLED SCL
|
||||
|
||||
// D16 - Battery voltage ADC input
|
||||
31, // D16 P0.31 VBAT_ADC
|
||||
// GROVE
|
||||
43, // D17 P0.00 GROVESDA
|
||||
44, // D18 P0.01 GROVESCL
|
||||
|
||||
// FLASH
|
||||
21, // D19 P0.21 (QSPI_SCK)
|
||||
25, // D20 P0.25 (QSPI_CSN)
|
||||
20, // D21 P0.20 (QSPI_SIO_0 DI)
|
||||
24, // D22 P0.24 (QSPI_SIO_1 DO)
|
||||
22, // D23 P0.22 (QSPI_SIO_2 WP)
|
||||
23, // D24 P0.23 (QSPI_SIO_3 HOLD)
|
||||
|
||||
36, // D25 TB_UP
|
||||
12, // D26 TB_DOWN
|
||||
11, // D27 TB_LEFT
|
||||
35, // D28 TB_RIGHT
|
||||
37, // D29 TB_PRESS
|
||||
4, // D30 BAT_CTL
|
||||
};
|
||||
}
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
pinMode(PIN_QSPI_CS, OUTPUT);
|
||||
digitalWrite(PIN_QSPI_CS, HIGH);
|
||||
// This setup is crucial for ensuring low power consumption and proper initialization of the hardware components.
|
||||
// VBAT_ENABLE
|
||||
pinMode(BAT_READ, OUTPUT);
|
||||
digitalWrite(BAT_READ, HIGH);
|
||||
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
digitalWrite(PIN_LED1, LOW);
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
digitalWrite(PIN_LED2, LOW);
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
}
|
||||
181
boards/seeed_wio_tracker_L1/variant.h
Normal file
181
boards/seeed_wio_tracker_L1/variant.h
Normal file
|
|
@ -0,0 +1,181 @@
|
|||
#ifndef _SEEED_TRACKER_L1_H_
|
||||
#define _SEEED_TRACKER_L1_H_
|
||||
#include "WVariant.h"
|
||||
// ----------------------------------------
|
||||
// Clock Configuration
|
||||
// ----------------------------------------
|
||||
#define VARIANT_MCK (64000000ul) // Master clock frequency
|
||||
#define USE_LFXO // 32.768kHz crystal for LFCLK
|
||||
|
||||
// ----------------------------------------
|
||||
// Pin Capacity Definitions
|
||||
// ----------------------------------------
|
||||
#define PINS_COUNT (33u) // Total GPIO pins
|
||||
#define NUM_DIGITAL_PINS (33u) // Digital I/O pins
|
||||
#define NUM_ANALOG_INPUTS (8u) // Analog inputs (A0-A5 + VBAT + AREF)
|
||||
#define NUM_ANALOG_OUTPUTS (0u)
|
||||
|
||||
// ----------------------------------------
|
||||
// LED Configuration
|
||||
// ----------------------------------------
|
||||
// LEDs
|
||||
// LEDs
|
||||
#define PIN_LED1 (11) // LED P1.15
|
||||
#define PIN_LED2 (12) //
|
||||
|
||||
#define LED_GREEN PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
#define LED_STATE_ON 1 // State when LED is lit
|
||||
// ----------------------------------------
|
||||
// Button Configuration
|
||||
// ----------------------------------------
|
||||
#define CANCEL_BUTTON_PIN D13 // This is the Program Button
|
||||
// #define BUTTON_NEED_PULLUP 1
|
||||
#define CANCEL_BUTTON_ACTIVE_LOW true
|
||||
#define CANCEL_BUTTON_ACTIVE_PULLUP false
|
||||
|
||||
// #define BUTTON_PIN_TOUCH 13 // Touch button
|
||||
// ----------------------------------------
|
||||
// Digital Pin Mapping (D0-D10)
|
||||
// ----------------------------------------
|
||||
#define D0 0 // P1.06 GNSS_WAKEUP/IO0
|
||||
#define D1 1 // P0.07 LORA_DIO1
|
||||
#define D2 2 // P1.07 LORA_RESET
|
||||
#define D3 3 // P1.10 LORA_BUSY
|
||||
#define D4 4 // P1.14 LORA_CS
|
||||
#define D5 5 // P1.08 LORA_SW
|
||||
#define D6 6 // P0.27 GNSS_TX
|
||||
#define D7 7 // P0.26 GNSS_RX
|
||||
#define D8 8 // P0.30 SPI_SCK
|
||||
#define D9 9 // P0.03 SPI_MISO
|
||||
#define D10 10 // P0.28 SPI_MOSI
|
||||
#define D12 12 // P1.00 Buzzer
|
||||
#define D13 13 // P0.08 User Button
|
||||
#define D14 14 // P0.05 OLED SCL
|
||||
#define D15 15 // P0.06 OLED SDA
|
||||
#define D16 16 // P0.31 VBAT_ADC
|
||||
#define D17 17 // P0.00 GROVE SDA
|
||||
#define D18 18 // P0.01 GROVE_SCL
|
||||
// ----------------------------------------
|
||||
// Analog Pin Definitions
|
||||
// ----------------------------------------
|
||||
#define PIN_A0 0 // P0.02 Analog Input 0
|
||||
#define PIN_A1 1 // P0.03 Analog Input 1
|
||||
#define PIN_A2 2 // P0.28 Analog Input 2
|
||||
#define PIN_A3 3 // P0.29 Analog Input 3
|
||||
#define PIN_A4 4 // P0.04 Analog Input 4
|
||||
#define PIN_A5 5 // P0.05 Analog Input 5
|
||||
#define PIN_VBAT D16 // P0.31 Battery voltage sense
|
||||
// ----------------------------------------
|
||||
// Communication Interfaces
|
||||
// ----------------------------------------
|
||||
// I2C Configuration
|
||||
// #define HAS_WIRE 1
|
||||
#define PIN_WIRE_SDA D14 // P0.09
|
||||
#define PIN_WIRE_SCL D15 // P0.10
|
||||
#define WIRE_INTERFACES_COUNT 2
|
||||
#define PIN_WIRE1_SDA D18
|
||||
#define PIN_WIRE1_SCL D17
|
||||
#define I2C_NO_RESCAN
|
||||
|
||||
static const uint8_t SDA = PIN_WIRE_SDA;
|
||||
static const uint8_t SCL = PIN_WIRE_SCL;
|
||||
|
||||
#define HAS_SCREEN 1
|
||||
#define USE_SSD1306 1
|
||||
|
||||
// SPI Configuration (SX1262)
|
||||
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
#define PIN_SPI_MISO 9 // P0.03 (D9)
|
||||
#define PIN_SPI_MOSI 10 // P0.28 (D10)
|
||||
#define PIN_SPI_SCK 8 // P0.30 (D8)
|
||||
|
||||
// SX1262 LoRa Module Pins
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS D4 // Chip select
|
||||
#define SX126X_DIO1 D1 // Digital IO 1 (Interrupt)
|
||||
#define SX126X_BUSY D3 // Busy status
|
||||
#define SX126X_RESET D2 // Reset control
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // TCXO supply voltage
|
||||
#define SX126X_RXEN D5 // RX enable control
|
||||
#define SX126X_TXEN RADIOLIB_NC
|
||||
#define SX126X_DIO2_AS_RF_SWITCH // This Line is really necessary for SX1262 to work with RF switch or will loss TX power
|
||||
// ----------------------------------------
|
||||
// Power Management
|
||||
// ----------------------------------------
|
||||
|
||||
#define BAT_READ 30 // D30 = P0.04 Reads battery voltage from divider on signal board.
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define ADC_MULTIPLIER 2.0
|
||||
#define BATTERY_PIN PIN_VBAT // PIN_A7
|
||||
#define AREF_VOLTAGE 3.6
|
||||
// ----------------------------------------
|
||||
// GPS L76KB
|
||||
// ----------------------------------------
|
||||
#define GPS_L76K
|
||||
#ifdef GPS_L76K
|
||||
#define GPS_TX_PIN D6 // P0.26 - This is data from the MCU
|
||||
#define GPS_RX_PIN D7 // P0.27 - This is data from the GNSS
|
||||
#define HAS_GPS 1
|
||||
#define GPS_BAUDRATE 9600
|
||||
#define GPS_THREAD_INTERVAL 50
|
||||
#define PIN_SERIAL1_RX GPS_RX_PIN
|
||||
#define PIN_SERIAL1_TX GPS_TX_PIN
|
||||
|
||||
#define PIN_GPS_STANDBY D0
|
||||
|
||||
// #define GPS_DEBUG
|
||||
// #define GPS_EN D18 // P1.05
|
||||
#endif
|
||||
|
||||
// ----------------------------------------
|
||||
// On-board QSPI Flash
|
||||
// ----------------------------------------
|
||||
// On-board QSPI Flash
|
||||
#define PIN_QSPI_SCK (21)
|
||||
#define PIN_QSPI_CS (22)
|
||||
#define PIN_QSPI_IO0 (23)
|
||||
#define PIN_QSPI_IO1 (24)
|
||||
#define PIN_QSPI_IO2 (25)
|
||||
#define PIN_QSPI_IO3 (26)
|
||||
|
||||
#define EXTERNAL_FLASH_DEVICES P25Q16H
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
// ----------------------------------------
|
||||
// Buzzer
|
||||
// ----------------------------------------
|
||||
// Buzzer
|
||||
|
||||
#define PIN_BUZZER D12 // P1.00, pwm output
|
||||
|
||||
// ----------------------------------------
|
||||
// joystick
|
||||
// ----------------------------------------
|
||||
|
||||
#define CANNED_MESSAGE_ADD_CONFIRMATION 1
|
||||
|
||||
// trackball
|
||||
#define HAS_TRACKBALL 1
|
||||
#define TB_UP 25
|
||||
#define TB_DOWN 26
|
||||
#define TB_LEFT 27
|
||||
#define TB_RIGHT 28
|
||||
#define TB_PRESS 29
|
||||
#define TB_DIRECTION FALLING
|
||||
// ----------------------------------------
|
||||
// Compatibility Definitions
|
||||
// ----------------------------------------
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
// Serial port placeholders
|
||||
|
||||
#define PIN_SERIAL2_RX (-1)
|
||||
#define PIN_SERIAL2_TX (-1)
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif // _SEEED_SOLAR_NODE_H_
|
||||
|
|
@ -638,7 +638,7 @@ void sx126x::enableTCXO() {
|
|||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_HELTEC_T114
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_TECHO
|
||||
#elif BOARD_MODEL == BOARD_TECHO || BOARD_MODEL == BOARD_WIO_L1
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
#elif BOARD_MODEL == BOARD_HELTEC32_V4
|
||||
uint8_t buf[4] = {MODE_TCXO_1_8V_6X, 0x00, 0x00, 0xFF};
|
||||
|
|
@ -812,4 +812,4 @@ byte sx126x::random() { return readRegister(REG_RANDOM_GEN_6X); }
|
|||
|
||||
sx126x sx126x_modem;
|
||||
|
||||
#endif
|
||||
#endif
|
||||
|
|
|
|||
81
tools/install_wio_l1_board.sh
Normal file
81
tools/install_wio_l1_board.sh
Normal file
|
|
@ -0,0 +1,81 @@
|
|||
#!/usr/bin/env bash
|
||||
set -euo pipefail
|
||||
|
||||
ARDUINO_DATA_DIR="${ARDUINO_DATA_DIR:-$HOME/Library/Arduino15}"
|
||||
CORE_BASE="${ARDUINO_DATA_DIR}/packages/Seeeduino/hardware/nrf52"
|
||||
|
||||
if [[ ! -d "${CORE_BASE}" ]]; then
|
||||
echo "Seeeduino nrf52 core not found in ${CORE_BASE}"
|
||||
echo "Install it with: arduino-cli core install Seeeduino:nrf52"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
CORE_DIR="$(ls -d "${CORE_BASE}"/* | sort -V | tail -n1)"
|
||||
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||
VARIANT_SRC="${SCRIPT_DIR}/../boards/seeed_wio_tracker_L1"
|
||||
VARIANT_DST="${CORE_DIR}/variants/seeed_wio_tracker_L1"
|
||||
BOARDS_TXT="${CORE_DIR}/boards.txt"
|
||||
|
||||
mkdir -p "${VARIANT_DST}"
|
||||
cp "${VARIANT_SRC}/variant.h" "${VARIANT_DST}/variant.h"
|
||||
cp "${VARIANT_SRC}/variant.cpp" "${VARIANT_DST}/variant.cpp"
|
||||
|
||||
tmp_boards="$(mktemp)"
|
||||
awk '
|
||||
/^# WIO_L1_BEGIN/ {skip=1; next}
|
||||
/^# WIO_L1_END/ {skip=0; next}
|
||||
skip==1 {next}
|
||||
/^seeed_wio_tracker_L1\./ {next}
|
||||
{print}
|
||||
' "${BOARDS_TXT}" > "${tmp_boards}"
|
||||
mv "${tmp_boards}" "${BOARDS_TXT}"
|
||||
|
||||
cp "${BOARDS_TXT}" "${BOARDS_TXT}.bak"
|
||||
cat >> "${BOARDS_TXT}" <<'EOF'
|
||||
|
||||
# WIO_L1_BEGIN
|
||||
seeed_wio_tracker_L1.name=Seeed Wio Tracker L1
|
||||
|
||||
seeed_wio_tracker_L1.vid.0=0x2886
|
||||
seeed_wio_tracker_L1.pid.0=0x1668
|
||||
seeed_wio_tracker_L1.vid.1=0x2886
|
||||
seeed_wio_tracker_L1.pid.1=0x1667
|
||||
|
||||
seeed_wio_tracker_L1.bootloader.tool=bootburn
|
||||
seeed_wio_tracker_L1.upload.tool=nrfutil
|
||||
seeed_wio_tracker_L1.upload.protocol=nrfutil
|
||||
seeed_wio_tracker_L1.upload.use_1200bps_touch=true
|
||||
seeed_wio_tracker_L1.upload.wait_for_upload_port=true
|
||||
seeed_wio_tracker_L1.upload.maximum_size=815104
|
||||
seeed_wio_tracker_L1.upload.maximum_data_size=248832
|
||||
|
||||
seeed_wio_tracker_L1.build.mcu=cortex-m4
|
||||
seeed_wio_tracker_L1.build.f_cpu=64000000
|
||||
seeed_wio_tracker_L1.build.board=Seeed_Wio_Tracker_L1
|
||||
seeed_wio_tracker_L1.build.core=nRF5
|
||||
seeed_wio_tracker_L1.build.variant=seeed_wio_tracker_L1
|
||||
seeed_wio_tracker_L1.build.usb_manufacturer="Seeed"
|
||||
seeed_wio_tracker_L1.build.usb_product="Wio Tracker L1"
|
||||
seeed_wio_tracker_L1.build.extra_flags=-DNRF52840_XXAA -DARDUINO_WIO_TRACKER_1110 -DARDUINO_MDBT50Q_RX {build.flags.usb}
|
||||
seeed_wio_tracker_L1.build.ldscript=nrf52840_s140_v7.ld
|
||||
seeed_wio_tracker_L1.build.vid=0x2886
|
||||
seeed_wio_tracker_L1.build.pid=0x1668
|
||||
|
||||
seeed_wio_tracker_L1.menu.softdevice.s140v6=S140 7.3.0
|
||||
seeed_wio_tracker_L1.menu.softdevice.s140v6.build.sd_name=s140
|
||||
seeed_wio_tracker_L1.menu.softdevice.s140v6.build.sd_version=7.3.0
|
||||
seeed_wio_tracker_L1.menu.softdevice.s140v6.build.sd_fwid=0x0123
|
||||
|
||||
seeed_wio_tracker_L1.menu.debug.l0=Level 0 (Release)
|
||||
seeed_wio_tracker_L1.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
seeed_wio_tracker_L1.menu.debug.l1=Level 1 (Error Message)
|
||||
seeed_wio_tracker_L1.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
seeed_wio_tracker_L1.menu.debug.l2=Level 2 (Full Debug)
|
||||
seeed_wio_tracker_L1.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
seeed_wio_tracker_L1.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
seeed_wio_tracker_L1.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
seeed_wio_tracker_L1.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
# WIO_L1_END
|
||||
EOF
|
||||
|
||||
echo "Installed Wio Tracker L1 variant into ${CORE_DIR}"
|
||||
Loading…
Add table
Add a link
Reference in a new issue